Umurbey District Eski Orhangazi Road Street No: 4/1 – Gemlik/BURSA
+90 (224) 514 24 17
iletisim@karatascsm.com
Our cut to length line sizes Hot Rolled (HR), Rolled-pickled (HRP), Rolled-pickled-oiled (PO) and Galvanized (GI) products according to the desired length measurement. As Karataş Steel Service Center, our cut-to-length line managed by our expert staff fulfills the demands of our customers with care and precision from cutting to packaging stage.
| CUT-TO-LENGTH LINE | |
| Raw Material Type |
GI, HR, HRP, HRPO Coil |
| Raw Material Strength |
1.50 – 4.00 mm Max. 550 N/mm2 4.00 – 6.00 mm Max. 350 N/mm2 |
| Thickness |
Min. 1.50 mm Mak. 6.00mm |
| Width |
Max. 2.100 mm |
|
Input Coil Weigh
|
Max. 30 Ton |
|
Coil Outer Diameter |
Max. Ø 2.000 mm Min. Ø 700 mm. |
|
Coil Inner Diameter |
Ø 508 – Ø 890 mm |
|
Line Speed |
Max 70 mt/min (2 meters and above) |
|
Cut Plate Length |
Max 12.000 mm Min 600 mm |
|
Cut Plate Width |
Max 2100 mm Min 400 mm |
|
Cut Plate Length Accuracy |
± 0.50 mm |
|
Length Cutting Capacity |
1.50 mm thickness-min 2,000 mm cutting length-max 70 mt/min
3.00 mm thickness-min 2,000 mm cutting length-max 50 mt/min
6.00 mm thickness-min 2,000 mm cutting length-max 30 mt/min
|
As Karataş Steel Service Center, in addition to the slitting and cutting to length services we offer to our customers, we also offer a complete service with our stock…
Our slitting line resizes Cold Rolled (CR), Galvanized (GI), Pre-painted (PPGI) and Pickled (HRP) products according to the desired slitting dimensions. As Karataş…